FEATURES AND EXTRAS OF THE MIDEA MCD-36FNXD0 INVERTER AIR CONDITIONER
Follow Me – The inbuilt thermistor in the remote controller will sense the temperatures surrounding the user, allowing the system to offer the greatest levels of comfort control.
8°C heating – In heating operation, the preset temperature of the air conditioner can be as low as 8°C, which keeps the room temperature steady at 8°C for in winter.
Temperature Compensation – This function helps overcome any discrepancies in temperature that can be found between the height of the indoor fan and controlled space. Helping provide a more accurate temperature control.
360° Air Flow Panel – 360 degree air outlet creates a soft and gentle air flow which circulates throughout the whole space, offering optimum temperature distribution.
Refrigerant Leakage Detect – This function automatically monitors the operating parameters of the system and stops the equipment from running if a refrigerant leak is detected.
Emergency Use Function – If a temperature sensor error occurs the unit will alarm and operate in emergency function mode until replaced. The system will continue to operate based on average readings from the previous days control.
Low Ambient Cooling – With built-in low ambient kit and a specially designed PCB, the outdoor fan speed is automatically changed according to the condensing temperature. Cooling is achievable down to -15°C.
Fresh Air – Outside air can be ducted onto the indoor fan coil to provide room occupants with fresh and healthy air.
Wired Control – Wired controller can be fixed to the wall for a permanently mounted control solution.
Central Control Management – The centralised controller is a multi functional device that can control multiple units/systems.
Auto Restart Function – If the system is stopped because of power interruption it will automatically restart in the previous settings and mode when the power resumes.
Louver Position Memory – When you start the unit next time, the angle of horizontal louver will automatically move to the same position as you set last time.
Error Alarm Port – Specialised inbuilt reserved ports which allow a simple remote output alarm for connection to BMS or external alarm.
Built-in Drain Pump – The inbuilt drain pump can lift condensing water up to 750mm.
TECHNICAL SPECIFICATION FOR MIDEA MCD-36FNXD0 INVERTER AIR CONDITIONER
|Power Source||V/O/Hz||380-415 / 3 / 50|
|Capacity||Cooling||kW||10.50 (2.64 – 12.02)|
|Heating||11.09 (2.93 – 13.19)|
|Input Power||Cooling||W||3900 (660 – 4500)|
|Heating||2970 (650 – 4550)|
|Rated current||Cooling||A||7.2 (1.2 – 8.2)|
|Heating||5.5 (1.2 – 8.3)|
|Air Flow (indoor unit)||m3/h||1775 / 1620 / 1438|
|Sound pressure level (indoor unit)||dB(A)||52 / 49 / 46|
|Sound power level (indoor unit)||dB(A)||63|
|Air Flow (outdoor unit)||m3/h||4000|
|Sound pressure level (outdoor unit)||dB(A)||64|
|Sound power level (outdoor unit)||dB(A)||68|
|Dimension (W x D x H)
|Indoor||mm||840 x 840 x 245|
|Outdoor||mm||946 x 410 x 810|
|Refrigerant piping (Liquid / Gas)||mm||9.52 / 15.9|
|Max. refrigerant pipe length||m||65|
|Max. difference in level||30|
|Operation temperature||Cooling||°C||-15 ~ 50|
|Heating||-15 ~ 24|